Please use this identifier to cite or link to this item:
https://doi.org/10.21256/zhaw-4914| Publication type: | Conference paper |
| Type of review: | Peer review (publication) |
| Title: | Tool qualification considerations for tools supporting STPA |
| Authors: | Krauss, Sven Stefan Rejzek, Martin Hilbes, Christian |
| DOI: | 10.21256/zhaw-4914 10.1016/j.proeng.2015.11.500 |
| Published in: | Procedia Engineering |
| Volume(Issue): | 128 |
| Page(s): | 15 |
| Pages to: | 24 |
| Conference details: | 3rd European STAMP Workshop, Amsterdam, Netherlands, 4-6 October 2015 |
| Issue Date: | 2015 |
| Publisher / Ed. Institution: | Elsevier |
| ISSN: | 1877-7058 |
| Language: | English |
| Subjects: | System-Theoretic Process Analysis; Dependable software; SAHRA; Multi domain tool qualification; Tool validation; Toolchain analysis; Cyber physical systems; Offline support tools |
| Subject (DDC): | 005: Computer programming, programs and data |
| Abstract: | We evaluated tool qualification requirements for hazard and risk analysis software tools, particularly for tools supporting System-Theoretic Process Analysis (STPA), and compared the tool qualification approaches of safety standards IEC 61508, EN 50128, DO-178C/DO-330 and ISO 26262. Our software tool SAHRA integrates STPA in an existing engineering toolchain by providing an extension for the UML/SysML modeling tool Sparx Systems Enterprise Architect. We found that the qualification of this tool according to the mentioned safety standards was not straightforward and required further analysis. Therefore, we analyzed the tool risks and found that those depend on many factors such as process risks, risks from tool errors, tool integration risks and operational scenarios regarding the use of the tool in the development lifecycle. We selected four operational scenarios for tools supporting STPA to evaluate tool qualification requirements. After concluding that a tool qualification is required, we used a multi-domain tool qualification development lifecycle guided by DO-330 for SAHRA. |
| URI: | https://digitalcollection.zhaw.ch/handle/11475/13412 |
| Fulltext version: | Published version |
| License (according to publishing contract): | CC BY-NC-ND 4.0: Attribution - Non commercial - No derivatives 4.0 International |
| Departement: | School of Engineering |
| Organisational Unit: | Institute of Applied Mathematics and Physics (IAMP) |
| Appears in collections: | Publikationen School of Engineering |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| 2015_Krauss_Tool_qualification_considerations_for_tools_supporting_STPA.pdf | 747.49 kB | Adobe PDF |  View/Open |
Show full item record
Krauss, S. S., Rejzek, M., & Hilbes, C. (2015). Tool qualification considerations for tools supporting STPA [Conference paper]. Procedia Engineering, 128, 15–24. https://doi.org/10.21256/zhaw-4914
Krauss, S.S., Rejzek, M. and Hilbes, C. (2015) ‘Tool qualification considerations for tools supporting STPA’, in Procedia Engineering. Elsevier, pp. 15–24. Available at: https://doi.org/10.21256/zhaw-4914.
S. S. Krauss, M. Rejzek, and C. Hilbes, “Tool qualification considerations for tools supporting STPA,” in Procedia Engineering, 2015, vol. 128, pp. 15–24. doi: 10.21256/zhaw-4914.
KRAUSS, Sven Stefan, Martin REJZEK und Christian HILBES, 2015. Tool qualification considerations for tools supporting STPA. In: Procedia Engineering. Conference paper. Elsevier. 2015. S. 15–24
Krauss, Sven Stefan, Martin Rejzek, and Christian Hilbes. 2015. “Tool Qualification Considerations for Tools Supporting STPA.” Conference paper. In Procedia Engineering, 128:15–24. Elsevier. https://doi.org/10.21256/zhaw-4914.
Krauss, Sven Stefan, et al. “Tool Qualification Considerations for Tools Supporting STPA.” Procedia Engineering, vol. 128, Elsevier, 2015, pp. 15–24, https://doi.org/10.21256/zhaw-4914.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.