Please use this identifier to cite or link to this item:
https://doi.org/10.21256/zhaw-20460Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Dennig, Hans-Jörg | - |
| dc.contributor.author | Zumofen, Livia | - |
| dc.contributor.author | Kirchheim, Andreas | - |
| dc.date.accessioned | 2020-09-10T16:54:31Z | - |
| dc.date.available | 2020-09-10T16:54:31Z | - |
| dc.date.issued | 2020-09-01 | - |
| dc.identifier.isbn | 978-3-030-54333-4 | de_CH |
| dc.identifier.isbn | 978-3-030-54334-1 | de_CH |
| dc.identifier.uri | https://digitalcollection.zhaw.ch/handle/11475/20460 | - |
| dc.description.abstract | This paper describes the production, quality and tests of plastic gears made by fused filament fabrication (FFF). Different 3D printers of low and high quality and four different materials were tested: PLA, ABS, PA and PA carbon fiber composite. After optimizing the print parameters, various gears were manufactured and tested. The geometry and the test procedure were executed based on the VDI 2736 standard. This paper is a feasibility study of the fatigue strength of different gears. There is no material data set for the specific FFFMaterials and certain printers. The results show, that the quality of the printing process and the accuracy of the geometry are not responsible for the failure mode. The most important parameter is the friction coefficient of the different materials. Due to friction the tooth root will heat up and effect the material properties. PLA gears failed due to the low melting temperature, whereas ABS and PA gears failed on tooth root fracture. | de_CH |
| dc.language.iso | en | de_CH |
| dc.publisher | Springer | de_CH |
| dc.rights | Licence according to publishing contract | de_CH |
| dc.subject | Gear | de_CH |
| dc.subject | Fused filament fabrication | de_CH |
| dc.subject | Testing | de_CH |
| dc.subject | Additive manufacturing | de_CH |
| dc.subject | VDI 2736 | de_CH |
| dc.subject.ddc | 670: Industrielle und handwerkliche Fertigung | de_CH |
| dc.title | Feasibility investigation of gears manufactured by fused filament fabrication | de_CH |
| dc.type | Konferenz: Paper | de_CH |
| dcterms.type | Text | de_CH |
| zhaw.departement | School of Engineering | de_CH |
| zhaw.organisationalunit | Institute of Product Development and Production Technologies (IPP) | de_CH |
| zhaw.publisher.place | Cham | de_CH |
| dc.identifier.doi | 10.1007/978-3-030-54334-1_22 | de_CH |
| dc.identifier.doi | 10.21256/zhaw-20460 | - |
| zhaw.conference.details | 2nd International Conference on Additive Manufacturing for Products and Applications (AMPA), Zurich, 1-3 September 2020 | de_CH |
| zhaw.funding.eu | No | de_CH |
| zhaw.originated.zhaw | Yes | de_CH |
| zhaw.pages.end | 320 | de_CH |
| zhaw.pages.start | 304 | de_CH |
| zhaw.parentwork.editor | Meboldt, Mirko | - |
| zhaw.parentwork.editor | Klahn, Christoph | - |
| zhaw.publication.status | acceptedVersion | de_CH |
| zhaw.embargo.end | 2021-09-01 | de_CH |
| zhaw.publication.review | Peer review (Publikation) | de_CH |
| zhaw.title.proceedings | Industrializing Additive Manufacturing : Proceedings of AMPA 2020 | de_CH |
| zhaw.webfeed | Additive Manufacturing | de_CH |
| zhaw.author.additional | No | de_CH |
| zhaw.display.portrait | Yes | de_CH |
| Appears in collections: | Publikationen School of Engineering | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| 2020_Dennig-etal_Feasibility-investigation-of-gears-manufactured-by-fused-filament-fabrication_AMPA.pdf | Accepted Version | 1.32 MB | Adobe PDF |  View/Open |
Show simple item record
Dennig, H.-J., Zumofen, L., & Kirchheim, A. (2020). Feasibility investigation of gears manufactured by fused filament fabrication [Conference paper]. In M. Meboldt & C. Klahn (Eds.), Industrializing Additive Manufacturing : Proceedings of AMPA 2020 (pp. 304–320). Springer. https://doi.org/10.1007/978-3-030-54334-1_22
Dennig, H.-J., Zumofen, L. and Kirchheim, A. (2020) ‘Feasibility investigation of gears manufactured by fused filament fabrication’, in M. Meboldt and C. Klahn (eds) Industrializing Additive Manufacturing : Proceedings of AMPA 2020. Cham: Springer, pp. 304–320. Available at: https://doi.org/10.1007/978-3-030-54334-1_22.
H.-J. Dennig, L. Zumofen, and A. Kirchheim, “Feasibility investigation of gears manufactured by fused filament fabrication,” in Industrializing Additive Manufacturing : Proceedings of AMPA 2020, Sep. 2020, pp. 304–320. doi: 10.1007/978-3-030-54334-1_22.
DENNIG, Hans-Jörg, Livia ZUMOFEN und Andreas KIRCHHEIM, 2020. Feasibility investigation of gears manufactured by fused filament fabrication. In: Mirko MEBOLDT und Christoph KLAHN (Hrsg.), Industrializing Additive Manufacturing : Proceedings of AMPA 2020. Conference paper. Cham: Springer. 1 September 2020. S. 304–320. ISBN 978-3-030-54333-4
Dennig, Hans-Jörg, Livia Zumofen, and Andreas Kirchheim. 2020. “Feasibility Investigation of Gears Manufactured by Fused Filament Fabrication.” Conference paper. In Industrializing Additive Manufacturing : Proceedings of AMPA 2020, edited by Mirko Meboldt and Christoph Klahn, 304–20. Cham: Springer. https://doi.org/10.1007/978-3-030-54334-1_22.
Dennig, Hans-Jörg, et al. “Feasibility Investigation of Gears Manufactured by Fused Filament Fabrication.” Industrializing Additive Manufacturing : Proceedings of AMPA 2020, edited by Mirko Meboldt and Christoph Klahn, Springer, 2020, pp. 304–20, https://doi.org/10.1007/978-3-030-54334-1_22.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.