Please use this identifier to cite or link to this item:
https://doi.org/10.21256/zhaw-24157Full metadata record
| DC Field | Value | Language |
|---|---|---|
| dc.contributor.author | Zumofen, Livia | - |
| dc.contributor.author | Kopanska, Katarzyna S. | - |
| dc.contributor.author | Bono, Epifania | - |
| dc.contributor.author | Kirchheim, Andreas | - |
| dc.contributor.author | De Haller, Emmanuel B. | - |
| dc.contributor.author | Graf-Hausner, Ursula | - |
| dc.date.accessioned | 2022-02-04T09:32:36Z | - |
| dc.date.available | 2022-02-04T09:32:36Z | - |
| dc.date.issued | 2022-02 | - |
| dc.identifier.issn | 2297-3079 | de_CH |
| dc.identifier.uri | https://digitalcollection.zhaw.ch/handle/11475/24157 | - |
| dc.description.abstract | Additive manufacturing has been well established in many sectors, including the medical industry. For load-bearing bone implants, titanium and its alloys, such as Ti6Al4V, are widely used due to their high strength to weight ratio and osseointegrative properties. However, bone resorption and loosening of implants is related to the significantly higher stiffness of dense Ti6Al4V, leading to stress shielding. With the aging of population, there is an increasing need for orthopedic implants with a high success rate and a long implant life span. Besides that the treatment of non-healing segmental bone defects, where the self repairing properties of bone tissue are not sufficient, is still a challenge. In both fields of application, patient-specific titanium implants combined with functionally graded porosity designed according to locally expected loads unlock new possibilities. Many studies underline the huge potential of the new design freedom to generate open porous structures and more personalized implants with enhanced mechanical properties that also integrate well with surrounding tissues. Integration of functionally graded open porosity into implants allows for the implant to more closely mimic the mechanical properties of human bone and its internal architecture. The results of this work represent the basis for developing complex porous titanium structures with various pore sizes and shapes to tailor structural mechanical properties and biological responses. Therefore, 3D porous structures with various pore sizes and shapes were designed and manufactured in Ti6Al4V using laser powder bed fusion (PBF-LB/M). Based on these structures, the correlation of pore size and shape with cell ingrowth, morphology, metabolic activity, and early markers for bone formation (ALP activity) was investigated in static cell cultures using the osteosarcoma cell line Saos-2. Mechanical properties, such as stiffness and compression strength, were investigated with compression testing. The present study concludes that cell morphology, metabolic activity, and ALP activity are widely independent of pore shape and size within the tested range of 400–700 µm pore size. Furthermore, the mechanical properties of the evaluated structures were in the range of cortical and trabecular bone. This opens the possibility to design mechanical properties with gradient porosity without decisively affecting biological responses. | de_CH |
| dc.language.iso | en | de_CH |
| dc.publisher | Frontiers Research Foundation | de_CH |
| dc.relation.ispartof | Frontiers in Mechanical Engineering | de_CH |
| dc.rights | http://creativecommons.org/licenses/by/4.0/ | de_CH |
| dc.subject | 3D printing | de_CH |
| dc.subject | Additive manufacturing | de_CH |
| dc.subject | Porous titanium | de_CH |
| dc.subject | 3D cell culture | de_CH |
| dc.subject | Implant | de_CH |
| dc.subject | PBF-LB/M | de_CH |
| dc.subject | Laser melting | de_CH |
| dc.subject | Biomaterial | de_CH |
| dc.subject.ddc | 610.28: Biomedizin, Biomedizinische Technik | de_CH |
| dc.subject.ddc | 670: Industrielle und handwerkliche Fertigung | de_CH |
| dc.title | Properties of additive-manufactured open porous titanium structures for patient-specific load-bearing implants | de_CH |
| dc.type | Beitrag in wissenschaftlicher Zeitschrift | de_CH |
| dcterms.type | Text | de_CH |
| zhaw.departement | Life Sciences und Facility Management | de_CH |
| zhaw.departement | School of Engineering | de_CH |
| zhaw.organisationalunit | Institut für Chemie und Biotechnologie (ICBT) | de_CH |
| zhaw.organisationalunit | Institute of Product Development and Production Technologies (IPP) | de_CH |
| dc.identifier.doi | 10.3389/fmech.2021.830126 | de_CH |
| dc.identifier.doi | 10.21256/zhaw-24157 | - |
| zhaw.funding.eu | No | de_CH |
| zhaw.issue | 830126 | de_CH |
| zhaw.originated.zhaw | Yes | de_CH |
| zhaw.publication.status | publishedVersion | de_CH |
| zhaw.volume | 7 | de_CH |
| zhaw.publication.review | Peer review (Publikation) | de_CH |
| zhaw.webfeed | Additive Manufacturing | de_CH |
| zhaw.author.additional | No | de_CH |
| zhaw.display.portrait | Yes | de_CH |
| zhaw.monitoring.costperiod | 2021 | de_CH |
| Appears in collections: | Publikationen School of Engineering | |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| 2022_Zumofen-etal_Properties-load-bearing-implants_FrontMech.pdf | 2.26 MB | Adobe PDF |  View/Open |
Show simple item record
Zumofen, L., Kopanska, K. S., Bono, E., Kirchheim, A., De Haller, E. B., & Graf-Hausner, U. (2022). Properties of additive-manufactured open porous titanium structures for patient-specific load-bearing implants. Frontiers in Mechanical Engineering, 7(830126). https://doi.org/10.3389/fmech.2021.830126
Zumofen, L. et al. (2022) ‘Properties of additive-manufactured open porous titanium structures for patient-specific load-bearing implants’, Frontiers in Mechanical Engineering, 7(830126). Available at: https://doi.org/10.3389/fmech.2021.830126.
L. Zumofen, K. S. Kopanska, E. Bono, A. Kirchheim, E. B. De Haller, and U. Graf-Hausner, “Properties of additive-manufactured open porous titanium structures for patient-specific load-bearing implants,” Frontiers in Mechanical Engineering, vol. 7, no. 830126, Feb. 2022, doi: 10.3389/fmech.2021.830126.
ZUMOFEN, Livia, Katarzyna S. KOPANSKA, Epifania BONO, Andreas KIRCHHEIM, Emmanuel B. DE HALLER und Ursula GRAF-HAUSNER, 2022. Properties of additive-manufactured open porous titanium structures for patient-specific load-bearing implants. Frontiers in Mechanical Engineering. Februar 2022. Bd. 7, Nr. 830126. DOI 10.3389/fmech.2021.830126
Zumofen, Livia, Katarzyna S. Kopanska, Epifania Bono, Andreas Kirchheim, Emmanuel B. De Haller, and Ursula Graf-Hausner. 2022. “Properties of Additive-Manufactured Open Porous Titanium Structures for Patient-Specific Load-Bearing Implants.” Frontiers in Mechanical Engineering 7 (830126). https://doi.org/10.3389/fmech.2021.830126.
Zumofen, Livia, et al. “Properties of Additive-Manufactured Open Porous Titanium Structures for Patient-Specific Load-Bearing Implants.” Frontiers in Mechanical Engineering, vol. 7, no. 830126, Feb. 2022, https://doi.org/10.3389/fmech.2021.830126.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.