1. ZHAW digitalcollection
  2. School of Engineering
  3. Publikationen
  4. Publikationen School of Engineering
Full metadata record
DC FieldValueLanguage
dc.contributor.authorDüzel, Sven-
dc.contributor.authorEberlein, Robert-
dc.contributor.authorDennig, Hans-Jörg-
dc.date.accessioned2024-03-22T10:17:33Z-
dc.date.available2024-03-22T10:17:33Z-
dc.date.issued2023-
dc.identifier.urihttps://digitalcollection.zhaw.ch/handle/11475/30332-
dc.description.abstractThe today’s standard calculation methods for investigating the load carrying capacity of polymer gears (such as VDI 2736) are based on the same assumptions as for steel gears. Due to strongly varying material properties of polymers regarding stiffness level, nonlinearity and rate dependency, the predicted lifetimes of polymer gears are inaccurate. In the current study a rate dependent nonlinear viscoplastic finite element (FE) modelling of polyoxymethylene (POM) allows quantifying the material influences not considered by standard assumptions for metal parts. By deploying such a nonlinear material model for POM, a POMsteel gear pairing is investigated and additionally validated on a gear test rig. Different rotational speeds but constant brake torque are investigated to analyse the influence of inertia under the dynamic conditions as well as the rate depended material properties to the fatigue lifetime. An accelerated approach for a repeated transient FE modelling of the gear meshing process makes it possible to investigate critical stress and strain states over consecutive cycles, specifically focusing on tooth root breaking. It turns out that a cyclic increase of (plastic) strains occurs in the polymer gear teeth roots. Through an extrapolation of the local maximum principal strain, the strain state of the failure causing cycles can be analysed and forms the basis for a fatigue life analysis of POM gears. In combination with a strain based failure criterion the admissible number of cycles of POM gears for various rotational speeds is predicted and validated against experimental results obtained from the gear test rig.de_CH
dc.language.isoende_CH
dc.rightsLicence according to publishing contractde_CH
dc.subjectPolymer gearde_CH
dc.subjectLifetime predictionde_CH
dc.subjectTooth root fracturede_CH
dc.subjectDamage modellingde_CH
dc.subjectMaterial modellingde_CH
dc.subjectExperimental validationde_CH
dc.subject.ddc620: Ingenieurwesende_CH
dc.titleFatigue life analysis of POM gears with transient material modelingde_CH
dc.typeKonferenz: Paperde_CH
dcterms.typeTextde_CH
zhaw.departementSchool of Engineeringde_CH
zhaw.organisationalunitInstitut für Mechanische Systeme (IMES)de_CH
zhaw.conference.details38th International Conference of the Polymer Processing Society (PPS-38), St. Gallen, Switzerland, 22-26 May 2023de_CH
zhaw.funding.euNode_CH
zhaw.originated.zhawYesde_CH
zhaw.publication.statuspublishedVersionde_CH
zhaw.publication.reviewPeer review (Abstract)de_CH
zhaw.webfeedMM Mechanics for Modellingde_CH
zhaw.author.additionalNode_CH
zhaw.display.portraitYesde_CH
Appears in collections:Publikationen School of Engineering

Files in This Item:
There are no files associated with this item.
Show simple item record
Düzel, S., Eberlein, R., & Dennig, H.-J. (2023). Fatigue life analysis of POM gears with transient material modeling. 38th International Conference of the Polymer Processing Society (PPS-38), St. Gallen, Switzerland, 22-26 May 2023.
Düzel, S., Eberlein, R. and Dennig, H.-J. (2023) ‘Fatigue life analysis of POM gears with transient material modeling’, in 38th International Conference of the Polymer Processing Society (PPS-38), St. Gallen, Switzerland, 22-26 May 2023.
S. Düzel, R. Eberlein, and H.-J. Dennig, “Fatigue life analysis of POM gears with transient material modeling,” in 38th International Conference of the Polymer Processing Society (PPS-38), St. Gallen, Switzerland, 22-26 May 2023, 2023.
DÜZEL, Sven, Robert EBERLEIN und Hans-Jörg DENNIG, 2023. Fatigue life analysis of POM gears with transient material modeling. In: 38th International Conference of the Polymer Processing Society (PPS-38), St. Gallen, Switzerland, 22-26 May 2023. Conference paper. 2023
Düzel, Sven, Robert Eberlein, and Hans-Jörg Dennig. 2023. “Fatigue Life Analysis of POM Gears with Transient Material Modeling.” Conference paper. In 38th International Conference of the Polymer Processing Society (PPS-38), St. Gallen, Switzerland, 22-26 May 2023.
Düzel, Sven, et al. “Fatigue Life Analysis of POM Gears with Transient Material Modeling.” 38th International Conference of the Polymer Processing Society (PPS-38), St. Gallen, Switzerland, 22-26 May 2023, 2023.


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.