Please use this identifier to cite or link to this item:
https://doi.org/10.21256/zhaw-23141| Publication type: | Article in scientific journal |
| Type of review: | Peer review (publication) |
| Title: | Increasing the safety against scuffing of additive manufactured gear wheels by internal cooling channels |
| Authors: | Dennig, Hans-Jörg Zumofen, Livia Stierli, Daniel Kirchheim, Andreas Winterberg, Simon |
| et. al: | No |
| DOI: | 10.1007/s10010-021-00515-5 10.21256/zhaw-23141 |
| Published in: | Forschung im Ingenieurwesen |
| Volume(Issue): | 86 |
| Issue: | 3 |
| Page(s): | 595 |
| Pages to: | 604 |
| Issue Date: | 13-Sep-2021 |
| Publisher / Ed. Institution: | Springer |
| ISSN: | 0015-7899 1434-0860 |
| Language: | English |
| Subjects: | Additive manufacturing; Zahnrad; Gear |
| Subject (DDC): | 670: Manufacturing |
| Abstract: | The layer-by-layer principle of the additive manufacturing (AM) technology of Laser-Powder-Bed-Fusion (LPBF) creates new opportunities in the design and manufacturing of efficient gear components. For example, integrating a cooling system can increase the safety against scuffing or reduce the amount of required lubrication and thus the splashing losses. Quenched and tempered steels or case-hardened steels are commonly used in the fabrication of gear components. However, the availability of these alloys for LPBF processing is still limited. The development of suitable LPBF metal gears (with a Gear Research Centre (FZG) type A geometry) out of quenched and tempered 30CrNiMo8 steel with internal cooling channels shows the possibility of significantly increasing the safety factor against scuffing. This work includes the development of a suitable cooling strategy, material development, the setup of a suitable test infrastructure and the analysis of the LPBF gears tested for scuffing. |
| Further description: | Erworben im Rahmen der Schweizer Nationallizenzen (http://www.nationallizenzen.ch) |
| URI: | https://digitalcollection.zhaw.ch/handle/11475/23141 |
| Fulltext version: | Published version |
| License (according to publishing contract): | CC BY 4.0: Attribution 4.0 International |
| Departement: | School of Engineering |
| Organisational Unit: | Centre for Product and Process Development (ZPP) |
| Appears in collections: | Publikationen School of Engineering |
Files in This Item:
| File | Description | Size | Format | |
|---|---|---|---|---|
| 2021_Dennig-etal_Increasing-safety-against-scuffing-in-AM.pdf | 2.07 MB | Adobe PDF |  View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.